Premium Acrylic Adhesive for flocking applications.

F57-16 is a styrene acrylic based general purpose flocking adhesive suitable for most surfaces, including board, concrete, ceramics, wood, wood composites, carpet, felt, fabrics and some metals and plastics. It is a water based product that air dries to touch in 5 minutes and completely within 24 hours. It gives a versatile, non-brittle and durable finish that is highly water-resistant, flexible and suitable for use in areas of high humidity.

If you are interested in buying in bulk, please contact us for pricing.

There are various ways to apply this adhesive and the following methods can be used (although some will be more successful after the viscosity of the adhesive has been reduced):

•    Paint Brush
•    Paint Roller
•    Spray Gun
•    Screen Printing*

The adhesive must not be applied to any part of the substrate that does not require flocking. Those areas should be covered with a mask or sealed off with masking tape.

*If this is applied by screen printing, ensure that the screen is clean immediately after use.